Portunus' unique business model enables to overcome domestic market challenges by offering equipment even to its competitors.
Terberg established the family business in 1869.
The Terberg family's business started as a forge. After the Second World War, when the blacksmith business had changed, the Terberg family began converting trucks from the American army. This represents the first step towards our future as a special vehicles manufacturer. We built the first Terberg 6x6 dump truck in 1966 and delivered our first terminal tractor to a customer in the Port of Rotterdam in 1973.
Terberg YT182/182DT/222 series Shipyard tractors are designed for the transport of trailers in distribution centers, shipping warehouses, container terminals and airports.
The spacious and comfortable driver's cabin offers excellent visibility and has an inside door for safety and convenience. YT tractors have fixed and forward-facing seats. If your application requires wide turnaround, consider the TT series with a 180° swivel seat. 4 x 2 Gross Total Weight (GCW) is max115 tons; the fifth wheel has a maximum lifting capacity of 36 tons.
Terberg DT series Distribution Tractor is a Low Ride unit for distribution centers. The driver's cabin floor is only about 0.5m above the ground and one can enter or exit the driver's cabin from the right or left side. It is a valuable feature for drivers who frequently leave their seats to open the doors of their trailers. The low-ride design, low noise and vibration level in the driver's cabin can significantly improve the driver's working conditions and increase efficiency. 4 x 2 Gross Total Weight (GCW) is maximum 75 tons; the fifth wheel has a maximum lifting capacity of 36 tons.
Terberg RT223/283/323/382/403 RoRo tractors are designed for RoRo operations in ports. The 4x4 drive, Ergoturn® 180° swivel seat and spacious cabin make these tractors the perfect choice for use on RoRo vessels and for turning on steep slopes. RT tractors are widely used in industry due to their robust design and powerful powertrain.
The unique Terberg SafeNeck option increases safety and capacity when using heavy trailers on ramps.
Terberg TT183/223 series terminal tractors are 4 x 2 units designed for applications where large reversals are required and therefore a 180° swivel seat is a key requirement. TT tractors combine the spacious driver's cab, the Ergoturn® swivel seat and the rear sliding door of the RT series with the agility of the YT series. For areas with slopes and ramps, you can consider the RT 4 x 4 series. 4 x 2 Gross Total Weight (GCW) maximum 90 tonnes; the fifth wheel has a maximum lifting capacity of 35 tons.
The Terberg Case Carrier excels in its agility and small turning circle in interchangeable cases that require maneuvering in distribution centers. It is also used for applications such as transporting defroster liquids at airports.
The design accommodates a variety of interchangeable body types and there are several options for locking the bodywork to the vehicle. BC units can optionally be equipped with a fifth wheel lifter to drive semi-trailers.
WORKING HARD IN PORTS AROUND THE WORLD
Terberg RT RoRo tractors (4x4 traction) and YT yard tractors (4x2) are widely used by the world's major port operators. The main reasons for choosing Terberg tractors are always low cost of ownership and reliability resulting from high fuel efficiency and reduced maintenance costs. Port operators with heavy RoRo loads also benefit from SafeNeck®, which significantly increases safety when transporting heavy loads on steep ship ramps.
The main reasons for choosing Terberg tractors are always low cost of ownership and reliability resulting from high fuel efficiency and reduced maintenance costs.
Terberg RT RoRo tractors (4x4 traction) and YT yard tractors (4x2) are widely used by the world's major port operators. The main reasons for choosing Terberg tractors are always low cost of ownership and reliability resulting from high fuel efficiency and reduced maintenance costs. Port operators with heavy RoRo loads also benefit from SafeNeck®, which significantly increases safety when transporting heavy loads on steep ship ramps.
Terberg develops various vehicles for container terminals. Our yard tractors are mainly used for container cranes and container transport between storage areas. Terberg provides solutions for multi-trailer trains from 4 to 10 TEU. We have four wheel drive tractors for applications where ice or slopes present different challenges.
Terberg has achieved a leading position in the RoRo tractor market. Our robust and well-designed tractors have been used in ports around the world for years. RoRo operations are widely seen in European and African ports. We have solutions for every load, ramp and tractor coupling that ensures safe and efficient cargo handling.
Terberg YT, TT and RT tractors are used in many industries to transport Gross Combined Weight loads up to 375 tons. Our industrial customers value the robustness and reliability of our products. The ease of maneuvering and swiveling seats on some models is particularly useful when working in crowded courtyards or among buildings. Our standard tractors are supplemented by the RT403 industrial tractor with a 45-ton lifting capacity, whose fifth wheel is particularly useful in the steel industry. This unit is also used for multi-trailers. The optional SafeNeck® improves weight distribution between the trailer and tractor and can increase load capacity by up to 250% when operating on ramps and slopes.
Terberg RT and YT tractors have found their place in steel mills where reliability is essential. It is well suited to 24/7 operations in such demanding industrial environments. Our range includes the RT382, designed for the heaviest applications up to a maximum gross combined weight of 375 tons. These tractors are used with plate and wrap carriers, unloading trailers, scrap buckets, etc Our RT382 industrial tractor has a fifth wheel with a lifting capacity of 45 tons for the steel industry and similar applications. This unit is also used for multi-trailers.
Terberg Road/Railway tractors can be used for shunting wagons and road trailers. There are two options. A conventional tractor with only tires and a suitable coupling for sites where the rail is on a paved surface. Our RR222/282 road/rail tractors with both tires and hydraulically mounted carrier wheels for working on conventional track and paved surfaces. We developed these tractors jointly with Zagro and they can be supplied for track spans of 1.0 to 1,668 metres.
Terberg offers a range of products for inland ports and rail terminals. We have shunting tractors for moving containers between cranes and storage areas, tractors for 4-10 TEU multi-trailers, haulage tractors and road/railway tractors. Our RR222/282 road/rail tractors with both tires and hydraulically mounted carrier wheels for working on conventional track and paved surfaces. We developed these tractors jointly with Zagro and they can be supplied for track spans of 1.0 to 1,668 metres.
Terberg YT shunting tractors (4x2) are used in many distribution centers where they have proven to be much more suitable for shunting than conventional road tractors. For example, there is an optimized drivetrain and gearboxes, while the lifter fifth wheels save time, as trailers can maneuver without lifting their legs on the ground. The high reliability and fuel efficiency of Terberg units stands out when they often have to run all day. Where local regulations allow, some operators also use these tractors for short trips on public roads. Operators using swap bodies appreciate Terberg BC carriers. The Terberg BC can handle cargo transport boxes very efficiently, as well as tow fifth wheel and drawbar trailers. Mobiler is a solution for transferring ISO containers between rail wagons and road vehicles without costly handling equipment. Our heavier tractors provide a good solution for hills, ramps and areas with regular ice. In addition, we offer road/rail tractors that can run on a paved surface or on rails on sleepers.
In YT tractors, lifter fifth wheels save time as the trailers can maneuver without lifting their legs on the ground. The optimized drivetrain and gearbox provide high reliability and fuel efficiency, essential in applications where tractors often have to run all day. Where local regulations allow, some operators use our TY tractors for short trips on public roads. Terberg YT tractors can be fitted with a range of accessories such as additional lighting, heavy fenders, central greasing systems, front link couplings and more. The comfortable cabin and good visibility allow your drivers to work comfortably and safely.
Terberg tractors are an attractive option for airport operations involving heavy loads and steep ramps. In these applications, they can increase your operational efficiency compared to conventional air-side tractors.
The RT382 is designed for the large tunneling contractor. With a width of only 2.55 meters, the vehicle also allows two-way traffic in tunnels under construction, where it can turn. Carrying a 40-tonne load, the RT382 can operate on a 12% gradient and Jacobs brakes enable it to survive long descents. The side discharger body can be replaced by a fifth wheel for trailers.
Our two CC units operate at 2,500 meters above sea level, transporting concrete and other materials. In addition to these, the RT222 4x4 tractor pulling the trailers in the tunnels for a hydroelectric power plant that can only be reached by cable transport lines also work . The small spin loop of the RTs keeps them spinning inside the tunnel.
Only Original Spare Parts are available.
When a vehicle arrives at the customer's site, it is not the end but the beginning of the relationship with Terberg. Your operations and maintenance personnel can always reach us for detailed information about vehicles and how to get the best performance out of them, or to solve technical problems. We also provide on-site training for drivers and mechanics.
Every day, our Spare Parts department ships tractor components to customers all over the country. Comprehensive inventory means that 96% of orders can be supplied from stock.
However, parts are normally available in longer time. In addition to spare parts for Terberg tractors, we can supply spare parts for all other major automotive brands. We also carry a full range of filters from leading suppliers.
Our spare parts specialists have access to a customer database and documentation to identify suitable spare parts based on your vehicle's serial number.
Portunus aims to provide the best possible services while supplying the genuine CUMMINS, VOLVO, SCANIA and PERKINS engine spares for port, marine and power generation industries in more than 56 countries across the world.
The engine models we focus on include engines which were commonly encountered in port applications. Through this experience across such a wide range of engine models together with our connections to genuine equipment manufacturers we are an excellent source of independent advice and trouble shooting. Our customers profit from an access to a reliable supply chain providing immediate availability and spare parts, ensuring the optimal performance of your diesel engines.
Portunus maintains an extensive inventory of engine spare parts. As an authorized parts distributor for most major manufacturers, Portunus has access to original data & catalogues which enables us to quickly and precisely identify needed spare parts and make critical deliveries on time. In conjunction with our integrated freight forwarding service, we are able to execute both domestic & international shipments within shortest period available. All spare parts apart from consumables are fully traceable and guaranteed for minimum six months.
Portunus offers a wide selection of new & reconditioned diesel engine units suitable for port equipment applications.
Portunus can provide a complete package including parts and service so that we can take full responsibility for the quality of the overhaul. If requested we can provide parts & service separately according to the customer’s wishes.
Factory-trained service engineers, technicians and wide equipment range available, enable us to provide service solutions within a short notice, with quality garanteed by our experience, reliability and parts availability.
As an independent company, we know that our customers always have a choice. Our aim is develop long term relationships by offering first class technical support, service and expertise at an attractive price.
Portunus provides advantageous and high-quality service to its customers in meeting the transmission and differential needs of port equipment applications.

Making use of the permanentely available stocks of Dana Spicer, Allison and ZF spare parts and major components, Portunus becomes your preferred supplier for this items allowing its customers to save time and Money.
The long time experience and know-how working together with the main manufacturers of this equipments allowed Portunus to be extremely competent on every step of the way, sourcing spares or components providing troubleshooting.

Portunus as an authorized parts distributor for most major manufacturers, has access to original data & catalogues which enables us to quickly track down customer needs. All spare parts apart from consumables are fully traceable and guaranteed for minimum six months.
Portunus offers a wide selection of new & reconditioned Transmission units suitable for port equipment applications.
Portunus can provide a complete package including parts and service so that we can take full responsibility for the quality of the overhaul. If requested we can provide parts & service separately according to the customer’s wishes.

Portunus is an efficient and reliable solution on performing Overhauls and Maintaining your transmission units, making use of their high skilled teams of engineers and technicians.
The equipment we own, takes us to an upper level, allowing us to test, report and handover your refurbished transmission as if it was a brand new one.


Portunus works with superior reliability brands which allow us to be equally special in all information we provide.


Through trainings Portunus attended in the factories of reference manufacturing Axles and it’s differentials, such as Kessler + Co, AxleTech and Dana Spicer allowed us to become specialist in this field identifying the correct parts needed in each occasion and supply it with the most competitive prices and prompt deliveries.



Portunus aims to supply trustable and durable solutions in this critical field for the customer’s.

The permanent challenge of widening our range of products allow us to supply you the industrial tires independently of any brand, adapting ourselves to what customer’s demands, but always convinced of the quality of the solutions we present. Portunus is offering suitable solutions for all sizes of tires, used in Terminal Tractors, Empty Handlers, Reachstackers, Barge Handlers, Rubber Tired Gantry Cranes and Mobile Harbor Cranes.
For any inquiry you may have for its spares and/or complete Hydraulic Pumps Portunus become an obvious alternative.

All the Hydraulic Pumps and its spares which are installed in the Port Equipment applications is into the scope of works of Portunus. Due to deep knowledge of the variety of Port equipment enabled us to identify the brands which we want to distinguish ourselves in, and startet supplying at very interesting rates brands such as Parker, Sauer-Danfoss, Danfoss, Rexroth, Vickers and Casappa.
Yedek parçalar ve/ya da bütün Hidrolik Pompalar konusunda tüm sorularınız için, Portunus net bir alternatif haline gelmektedir.

One of the most crucial components on cargo handling equipments is Spreader and its Spares, only few brands in the world can achieve the high quality in their production. Portunus allows, have gained the trust on supplying this components only for brands of reference.

The Technical Team of Portunus join together not only the know how provenient of 25 years working in this area, but also the attendee to workshops organized by the worldwide most famous brands in this segment, enable Portunus to count with highly qualified team of engineers and technicians that can act as consultants and conduct repair works in your facility or in our if necessary.
The item that establishes the connection between the lifting mechanism and the container bracket is the wire rope therefore it is essential to utilize top-notch quality wire ropes in order to prevent unexpected incidents.

As Portunus, we cater the best solution to your wire rope needs. We supply different types of wire ropes for Mobile Cranes, RTG's, RMG's, Dockyard Cranes, Ship to Shore Cranes from well known brands like Teufelberger, Çelik Halat, Oliveira, Teufelberger, Casar. Our ropes are tailor made and technical features can be streamlined in accordance with the requirements of our customer. We supply wire ropes in varying thickness, strand type& direction, material, core structure, rope-end type, mbl values.



Bir kargo elleçleme donanımını ileri ve geri hareket ettirmek, durdurmayı yöneteceği için önemlidir. Portunus olarak, her ikisi için de çözümlerimiz var ve bu görevleri yerine getirecek en iyi parçaları biliyoruz.

Konecranes-Linde, Kalmar-Ottawa, Terex-Fantuzzi-PPM, Sany, CVS, Terberg dahil, piyasa lideri markaların orijinal gaz ve fren pedalları tedarikçisiyiz.
No matter how sound the structure is or how durable the mechanical parts fitted on the machinery are, without properly commanding electronic brains, machinery will be non-functional. Therefore electronics constitute a very important place in a cargo handling machinery.

Portunus supply a wide range of Electronic Parts including , Control Units, Joysticks, Gear Controls suitable for your machine of Terex, Kone, Linde, Hyster, Sany and Fantuzzi.

Consumables like filters are inherent parts of machineries used with a frequent cycle. We can supply filters for your immediate and annual consumption needs.

We supply Hydraulic, Oil, Water, Air filters and are solely supplying genuine filters from all brands Baldwin, Donaldson, Fleetguard, Mann; MTU, Volvo, Cummins

1-Applicability
1.1 The relationship between Portunus (hereinafter referred to as the “Seller”) and the Buyer are subject exclusively to the General Terms and Conditions of Sale here present.
1.2 The General Terms and Conditions of Sale, the Special Terms and Conditions of Sale are binding upon confirmation by Seller of Buyer’s order and are hereinafter collectively referred to as the “Agreement”.
1.3 Failure or delay by the Seller in enforcing or partially enforcing any provision of the Agreement shall not be construed as a waiver of any of its rights under the Agreement, at present or in the future.
1.4 Seller communicates its General and its Special Terms and Conditions of Sale to Buyer as a part of its quotations & invoices.
1.5 Buyer cannot unilaterally or tacitly depart from the Agreement in any way whatsoever (e.g. by simple conduct). The Agreement excludes the application of any of the Buyer’s general or special terms and conditions. Buyer consequently recognizes that its general or special conditions do not apply to the Agreement.
2-Price Quotations & Orders
2.1 Quoted prices are valid during the specified calendar days on price offer or on proforma invoice document, subject to availability. A quotation represents a mere proposal by the Seller and does not bind the Seller, not even following acceptance by the Buyer. Only written acceptance by the Seller through order confirmation creates an Agreement.
2.2 Buyer must place its orders by e-mail or fax, and conduct all ensuing communication relating to its order through one of these channels, unless indicated otherwise in the Agreement.
2.3 The Seller assumes that the information submitted by the Buyer iscorrect and may use these as the basis of his quotation. Where the Buyer himself places an order by citing himself references to the Seller, and then the Seller shall assume that these correspond with the Product effectively required.
3-Subject
3.1 The subject of each individual sales transaction is explicitly described in the Agreement and covers the part(s), equipment, tool(s), machine(s) and/or service(s) described therein. The subject is hereinafter referred to as the “Products”.
3.2 The Buyer is entirely responsible for the choice of the Products. The Products are standard items which are not specifically created for the Buyer’s needs, or items which the Seller, at the Buyer’s request, adapted to meet the specifications described by the Buyer. The Seller is free from any responsibility should it become apparent that the Products do not meet the specific needs of the Buyer, when the Products do meet the specifications described by the Buyer. Art.
4-Price
4.1 The price for the Products is determined in the Agreement (hereinafter referred to as the “Purchase Price”). The Purchase Price is exclusive of VAT, taxes and levies, import or export duties. The Purchase Price do not include charges for delivery or collection of the Products nor the costs of any possible assembly, installation and start-up or, as the case may be, putting them into service.
5-Payment
5.1 The Buyer shall pay the Purchase Price and the Costs within the schedule indicated in the proforma invoice, via a transfer to the account number mentioned on the invoice, and mentioning the details as on the invoice. The Seller does, however, have the right to ask for a deposit or even complete payment prior to delivery.
Making a complaint, does not relieve the Buyer from his obligation to pay within the stated period.
5.2 The Purchase Price and the Costs are only effectively paid from the moment they have actually been received by the Seller.
5.3 The Buyer shall not be entitled to suspend and/or delay the payment of the purchase price, nor to set off its debit towards the Seller, even in case of claims connected with this purchase and raised for whatsoever reason, including in a judicial proceeding.
5.4 In the case of complete or partial non-payment of the debt on the due date laid down in Art. 5.1, the Buyer is liable, without prior notice, to pay a default interest of 12% per annum on the total amount outstanding from the day following the due date until complete payment.
5.5 In the case Seller becomes aware of any circumstance which may cause the financial status of the Buyer to substantially deteriorate, and also when a Buyer does not accept his bill of exchange on time, then all outstanding amounts, including those for which the Buyer is liable towards companies affiliated to the Seller, are immediately due, without the requirement of serving notice. In the aforementioned case, the Seller also has the right, immediately and without a period of notice, at his own discretion, to suspend or even terminate the Agreement by sending a written notice, in case the financial conditions of the Buyer have become such as to endanger his performance. In such a case, the Buyer shall be liable for any kind of compensation and subject to the Seller’s right to compensation.
5.6 Should the Buyer request at the time of placing the order for invoicing to be passed to a third party, the Buyer, in spite of invoicing to a third party, remains principally and indivisibly held to the fulfillment of all commitments.
6-Transfer of ownership and risk
6.1 The Products are at the risk of the Buyer from the time of delivery.
6.2 The ownership of the Products remains with Seller until the moment of complete payment of the Purchase Price and Costs, or until delivery, whichever occurs last. Consequently, the transfer of ownership becomes deferred until delivery or full payment of the Purchase Price and the Costs, whichever occurs last.
6.3 Until ownership of the Products has passed to the Buyer, the Buyer undertakes to:
6.3.1 Retain the Products in their original state and not to make the Products immovable by destination, nor to mix the Products with another commodity,
6.3.2 Maintain the Products in satisfactory condition and do everything possible to protect the Products against any form of partial or complete deterioration including - this enumeration being in no way restrictive - arising from fire, water damage, risk of explosion, theft, etc. and keep them insured on the Seller’s behalf for their full price against all risks to the reasonable satisfaction of the Seller, until complete payment of the Purchase Price and Costs.
6.4 In the ordinary course of business, Buyer is entitled to resell the Products of which the ownership has not yet passed to Buyer. In such case, the Buyer automatically assigns to Seller all claims against its customers that result from the resale of Products with respect to which ownership remains with Seller, in the amount equal to the Purchase Price for those Products, for as long as ownership of such Products has not passed to Buyer. Buyer has the authority to collect the claims resulting from the resale. Upon Seller’s request, Buyer must notify its customers of the assignment of the claim and deliver all information required to enforce Seller’s rights, to Seller.
6.5 The Buyer acknowledges that the Seller or one of its affiliated companies remains the exclusive owner of all the intellectual property rights related to the Products and the name and logo under which they are sold by the Seller and undertakes to make no claim on them, whatsoever.
7-Delivery
7.1 Delivery to a Buyer occurs FCA Istanbul (Incoterms 2010), unless otherwise agreed upon in writing between the Seller and the Buyer in the Agreement. Where, contrary to the aforementioned, it is agreed upon in writing that the Products shall be delivered to the Buyer or to an address specified by the Buyer, then this delivery may occur in the absence of the Buyer. In that case, subject to Art. 5.1, the consignment note is valid as proof of delivery.
7.2 In the event of damage to the packaging and/or an insufficient number of packages, the Buyer shall record this on the consignment note at the moment the Products are delivered, where it is available. He shall inform the Seller in writing, by fax sent within twelve (12) hours following delivery of the Products.
7.3 Delivery periods are merely indicative and are not of the essence for the Buyer. Late delivery or material impossibility to execute the Agreement cannot be a reason for compensation at the Seller’s expense, or refusal by the Buyer to take delivery of the Products.
7.4 A possible expressly agreed delivery period only starts from the time when the Seller is in possession of all information and documents required to implement delivery.
7.5 Where the Seller has committed himself expressly and in writing to compensation in the case of late delivery in the Agreement, this compensation is only due where the Buyer advises the Seller by registered letter, within the essential term of five (5) calendar days as from the expiry of the delivery period, to be in default because of exceeding the delivery period, enclosing proof of the damage suffered. The Seller shall, nevertheless, not be bound to compensation where late delivery is the result of Force Majeure, or is the fault of the Buyer. In the last case the Buyer is liable for the damage suffered and expense incurred. Force Majeure is defined as, without this summary being limiting: order from the authorities, mobilization, war, epidemic, lock-out, strike, demonstration, defects, fire, flood, explosion, lack of raw materials or labor forces, changed economic circumstances, vandalism, exceptional weather conditions and all circumstances which are outside the Seller’s control and disturb the ordinary course of business, without the Seller being required to demonstrate the unexpectedness of these circumstances. In any case, the potential compensation as a result of late delivery is limited to 0.5% of the Purchase Price for each complete week following the 28th working day after the delivery date, with a maximum amount equal to 5% of the Purchase Price.
7.6 The Buyer cannot invoke late delivery by the Seller to terminate the Agreement.
7.7 When partial delivery has already taken place and the Buyer refuses to accept further delivery, or when the Buyer makes further delivery impossible, the invoiced amount of the Products already delivered becomes immediately due and the Buyer is liable to pay compensation, laid down as a minimum of 35% of the Purchase Price of the unexecuted part of the Agreement, which does not diminish the Seller’s right to prove greater damage.
8-Right of retention
8.1 In the event of non-payment, in whole or in part, by the Buyer, of the Purchase Price and/or Costs, the Seller has a right of retention of all items and documents which were handed to him by the Buyer until complete payment of the outstanding amount, plus interests and expenses.
9-State of the Products and guarantee by the Seller
9.1 Second-hand Products are received by the Buyer in their state at the time of the delivery. The receipt of the second-hand Products by the Buyer at the moment of delivery, laid down in the Incoterm in Art. 7.1, implies acceptance of the Products.
9.2 Should the Buyer be of the opinion that the new Products do not conform to the order or have been visibly damaged, the Buyer shall submit a written complaint to the Seller within 48 hours of delivery of the Products. Should the Seller not have received a written complaint from the Buyer within the aforementioned time limit, the Buyer is presumed to have accepted the Products.
9.3 Hidden defects must be reported to the Seller by the Buyer within a period of five (5) working days after they have been discovered by the Buyer or normally should have been discovered, by registered letter to the Seller, and in any case within a period of three (3) months following the date the Products were delivered.
9.4 As far as Products which have been made to size and reconditioned Products are concerned, the Seller shall furthermore only be responsible for hidden defects which affect the essential components of the Products and which oblige the Buyer to undertake radical repairs to an extent that the Buyer would never have signed the Agreement had he known about these hidden defects.
9.5 The Seller does not need to indemnify the Buyer where:
9.5.1 The Buyer or any third party has carried out repairs or alterations to the Products or has attempted to do this; or
9.5.2 The defects are the result of incorrect or abnormal use, for instance, the use of the Products for purposes other than those for which they might reasonably be suited, overloading, inexpert use in a manner which does not match the instructions for correct use, assembly, maintenance, installation or use that is not conform to the technical or safety norms valid for the location where the Products are used; or
9.5.3 Any damage occurs which is related to usual wear, to failures caused by inexperience and/or negligence of the Buyer, to overburdens, to non-authorized interventions, to fortuitous events and Force Majeure.; or
9.5.4 The defects are not timely (i.e. within the periods mentioned in Art. 9.3 and 9.4 above) reported in detail in writing to the Seller in accordance with the Special Terms and Conditions of Sale, in particular the Guidelines on Product Returns.
9.6 Where Products present any lack of conformity, visible damage or hidden defect as mentioned above, and, after the examination by the Seller’s technicians, the Products result to be affected by the defects, the lack of conformity or the visible damages notified by the Buyer, it is explicitly agreed upon that the Seller, according to his expert insight and according to his choice, may either repair the Products or may replace the Products, or permit a price reduction, or that the Agreement should be terminated with refund of the Purchase Price and return of the Products. The Buyer does not have the right to ask for additional compensation.
9.7 The ownership of Products which the Seller has refunded or replaced shall automatically be transferred to the Seller. All costs for transport, customs, assembly, disassembly, travel and accommodation expenses of Seller’s representatives remain at the Buyer’s expense.
9.8 All implied warranties or conditions are excluded to the extent permitted by law.
10-Complaints and Product returns
10.1 All complaints and Product returns shall be governed by and construed in accordance with the Guidelines on Product Returns, to be found on the dedicated webpage of the Seller.
11-Liability
11.1 The following provisions set out the entire liability of the Seller (including any liability for the acts or omission of its employees, agents, representatives and sub-contractors) to the Buyer in respect of any breach of the Agreement and any representation, statement or tortuous act or omission, including negligence, arising under or in connection with the Agreement.
11.2 Without prejudice to the damage resulting directly from the breach by the Seller of his explicit commitments undertaken by virtue of this Agreement, the Seller’s liability is limited to the liability which is mandatory in accordance with the applicable law.
11.3 Should the Seller be liable in accordance with Art. 11.2, the Seller can never be held liable to the Buyer for any pure economic loss, loss of profit, loss of business, depletion of goodwill or otherwise, in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or in connection with the Agreement.
11.4 Should the Seller be liable according to Art. 11.2, the maximum amount of his liability is in any case explicitly limited to the amount of the Purchase Price.
11.5 The Buyer, who is approached by third parties as a result of damage caused by a defect in the Products which were delivered by the Buyer to third parties in any form, is in no instance entitled to make a claim for redress against the Seller.
12-Suspension and dissolution
12.1 In the case of non-payment or incomplete payment of the invoice relating to a running individual sales transaction on the due date laid down in Art. 5.1, the Seller has the right to refuse to enter into a new individual sales transaction or to suspend the fulfillment of his commitments under any running individual sales transaction with the Buyer.
12.2 Without prejudice to Art. 12.1, the Seller has the right to suspend fulfillment of his commitments where, after entering into the Agreement, Seller becomes aware of any circumstance which may cause the financial status of the Buyer to substantially deteriorate. If the Seller suspends fulfillment of his commitments under the Agreement, he must advise the Buyer immediately of the suspension.
12.3 Where it is clear to the Seller that the Buyer will make himself guilty of a serious shortcoming before Seller’s fulfillment of his commitments under the Agreement, the Seller has the right to declare the Agreement dissolved.
13-Miscellaneous
13.1 In the event one or more provisions of the Agreement is declared void, this shall in no way affect the validity of the other provisions. The parties undertake to do their utmost to replace such voided provision by a valid provision which has the same or largely the same economic effect as the voided provision, by mutual consent.
13.2 For the application of the present Agreement, working days are considered as: Monday to Friday inclusive, except where this day is an official public holiday in the country of the Seller.
14-Assignment
14.1 The Seller may assign the Agreement or any part of it to any person, firm or company.
14.2 The Buyer shall not be entitled to assign the Agreement or any part of it without the prior written consent of the Seller.
15-Applicable Law
15.1 With respect to what is not explicitly provided for in the General and Special Terms and Conditions of Sale and Ancillary Terms, the parties refer to the law of the country in which Seller is established, which governs this Agreement. The application of the Vienna Convention on International Sale of Goods is explicitly excluded.
16-Competent Court
16.1 All disputes concerning the interpretation and enforcement of the Agreement shall be submitted to the exclusive jurisdiction of the competent Courts nearest to the registered office of the Seller, which is Istanbul civic courts, with the express exclusion of any other competent Court.
16.2 Art. 16.1 shall operate for the benefit of the Seller and accordingly the Seller shall be entitled, at its own discretion, to waive the exclusive jurisdiction set forth in Art. 16.1, and therefore take proceedings against the Buyer in its domicile and in any other court or courts having jurisdiction.
